Brisbane Driving School
Heavy Rigid Licence - HR B (Syncromesh Gearbox)
Heavy Rigid The vehicle I want to drive
Heavy Rigid
Rigid Number of Axles GVM

(Bendi-Buses are
treated as rigid

3 or more

GVM greater than
8 tonnes.
Any towed trailer
must not weigh more
than 9 tonnes GVM

HR vehicles can have 3 or more axles.

What you can drive

  • A class MR vehicle
  • A bus (more than 8t GVM with more than 2 axles) with or without a trailer of not more than 9t GVM
  • A truck including a prime mover (more than 8t GVM with more than 2 axles) with or without a trailer of not more than 9t GVM
  • An articulated bus
  • A specially constructed vehicle, including a tractor(more than 8t GVM with more than 2 axles), with or without a trailer of not more than 9t GVM.

This course is designed for drivers who wish to gain the necessary skills and knowledge to obtain a Heavy Rigid (HR) Drivers Licence. It is ideal for those seeking work in the transport industry driving either a truck or a bus.
Participants will not only learn how to drive a Heavy Rigid vehicle, but also cover skills associated with driving Heavy Rigid vehicles in a safe, professional manner.
Participants do not require previous heavy vehicle driving experience. Pass the practical driving test (Note:. if you pass the practical driving test, your current licence will be reissued free of charge showing the new class)
A HR Licence is the highest class of licence you can obtain from a car licence.

HR-B Licence Conditions:

  • Heavy Rigid Condition B HR(B): Can drive Synchromesh (single clutch movement like a manual car as opposed to double clutch) and Automatic gearbox only.

Training Information

Driving lessons per hour.
Note: We do not have a minimum or a maximum number of lessons, you will only have what you need to make sure that you are test ready.On completion of a student's first lesson it will be possible to give them an estimate of what the training requirement will be.

Learning Outcomes

  • Road law
  • Performing cabin checks
  • Performing pre-drive safety inspections
  • Starting/Stopping sequence
  • Turning and handling
  • Reversing and manoeuvring
  • Vehicle positioning
  • Gears and their uses
  • System of vehicle control

Entry Requirements

  • Participants must hold a current Queensland Car Licence
  • Have held a car licence for at least 24 months
  • Provide primary proof of identification
  • Be able to drive a car with manual transmission
  • Pay the Practical Driving Test fee
  • Complete the Queensland Transport Road Rules test
  • Wear appropriate clothing, including fully enclosed shoes or runners.

How will I be assessed?

You will be assessed on the following key elements of driving a heavy vehicle:

  • Pre-drive checks
  • Manoeuvres – reversing exercise (left and/or right)
  • Gear changing
  • Hill start
  • Specific driving situations
  • Vehicle operation skills
  • Hazard recognition and decision making skills

How do I get a heavy vehicle learner's permit?

Heavy Vehicle Learners Questions to be undertaken at Department of Transport and Main Roads prior to practical driving test at a cost of $20.80. This fee is paid direct to Department of Transport and Main Roads. You can practice the questions on the internet but you physically have to go to a Department of Transport and Main Roads customer service centre and answer 10 multiple choice questions.

Make your online booking now

How do I study for the learner's permit?

Click the LICENSING link at and follow the links to the practice heavy vehicle questions. You can also buy a book to study if you do not use the internet from Queensland Transport and Main Roads customer service centre.

What is the test day procedure?

  • Meet a trainer at (Queensland Transport– unless otherwise arranged) for a one hour warm up session before the assessment. Bring your licence
  • It is a requirement to arrive at the Test Centre 20 minutes before test time
  • Hand in completed yellow application form and driver's licence at Transport Department
  • Read "A Message from your Driving Examiner"
  • Go out on test with examiner
  • While on the driving test the examiner is required to give clear and early directions. At times examiners will chat with you, and other times they may remain quite. Don't allow nerves or the examiner's personality put you off the task at hand which is to drive safely and obtain your licence
  • When the test is completed the examiner will discuss errors with you and then inform you if the test was a pass or a fail
  • If you pass, you will receive a new licence from the customer service centre when the paper work has been completed (usually 10-15 min)
  • If you fail, then another practical test will need to be done
  • Make sure you have paid any outstanding driving fines.

How long will the test go for?

The on-road driving test times for the HR vehicle licence classes are:

  • HR 60 to 70 minutes

Vehicle Type

Lessons are conducted in a Scania P 420. The truck has a 12 speed manual gear box. The vehicle is air conditioned. People often find if they are graduating from a car licence to a truck licence that these are good trucks to learn in.

I wish to book, what do I do next?

Contact Brisbane Driving School on 1300 752 524 or by email to discuss your training needs.

Make your online booking now

Facebook Facebook Home  •  About Us  •  Book a Course  •  Requirements  •  FAQ's  •  Contact Us

Light Rigid  •  Medium Rigid  •  Heavy Rigid  •  Heavy Combination •  Multi-Combination

Phone: 1300 752 524  •  Fax: (07) 3216 4321  •  Postal : PO Box 171 Clayfield, QLD 4011

ABN: 43 859 250 071  •  Copyright © 2013  •  Web Design: Emphasis
Online Test